{"product_id":"alocasia-corm-riser-for-the-puddle-method","title":"Alocasia Corm Riser for the Puddle Method - Black","description":"\u003cp\u003eCorm Risers reduce the risk of rot when growing alocasia corms using the puddle method. This is for one 3D printed Corm Riser made from PETG in black. Reusable over-and-over.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003e\u003cspan style=\"background-color: rgb(217, 247, 245);\"\u003eWhich cups to get\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003eThese risers fit standard 2 ounce sauce cups (shown in the photos but not included), which are easy and cheap to get separately or use leftovers from takeaways. This is just for the Corm Riser by itself. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThese also fit in most small containers and multiples can be used in larger containers also. I just prefer the little 2 oz cups as it's a nice small size for fitting lots of corms in my cabinet and keeping humidity high individually.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eI also prefer small separate containers with one corm in each to help prevent the spread of rot just in case to limit losses if anything goes wrong, although just adding the risers themselves helps with that also.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"background-color: rgb(217, 247, 246);\"\u003eWhat is PETG?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003eThese are made with higher quality PETG filament. PETG is stronger than the usual 3D printed filament with the added bonus of UV resistance for use under grow lights, bright natural light or sunlight. Its also has better chemical and heat resistance.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003e\u003cspan style=\"background-color: rgb(217, 247, 245);\"\u003eHow I do the puddle method using a corm riser\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003eFeel free to experiment. This is what's currently working for me. There are lots of handy tutorials on YouTube well worth a watch also about the puddle method... \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eCORM PREP\u003c\/strong\u003e: I gently clean the corm first, removing any substrate and old roots, and although optional, I also prefer to carefully peel the dark outer protective layer off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eSET-UP:\u003c\/strong\u003e After putting the corm riser inside a 2 oz sauce cup, I rest my corm on the riser with the pointed side of the corm facing up. I prefer one corm per riser per cup to reduce the risk of rot meaning I lose them all.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eWATER:\u003c\/strong\u003e I add water to the bottom so the level comes up to just below the bottom of the riser, barely touching or not touching the riser, but always making sure the corm is NOT submerged in the water at all. I use nutrient solution (I use 5mls of \u003ca href=\"https:\/\/www.lovethatleaf.co.nz\/products\/growth-technology-ccs-clonex-clone-solution\"\u003eGT CCS\u003c\/a\u003e per 1 litre of water).\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eLID:\u003c\/strong\u003e Then I pop the lid on the cup to lock in the humidity and reduce water loss. I also 'burp' my corm cups weekly (more about airflow below), and if I remember, I like to replace or top up with fresh nutrient solution weekly also.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"background-color: rgb(217, 247, 245);\"\u003eTips for alocasia corm growth success\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003eI find light and nutrients less important for growing alocasia from corms as with other methods of propagating plants.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eA good clean-up of the corm at the start sets you up for success. Any old roots or substrate left attached to the corm can increase the chance of rot. That's also why I like to 'peel' that brown outer layer off after I've cleaned everything else.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOnce clean and set-up in its cup, I find the more important considerations are:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsistent, constant moisture\u003c\/strong\u003e. No drying out! Yet you also don't want your corms sitting IN water (hence why the puddle method can be prone to rot without a corm riser to lift the corm up).\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh humidity \u003c\/strong\u003ebut still with airflow! Another reason rot is a risk is the need for high humidity but also airflow. I use the 'burp method' where I air out all my corm cups once to twice a week just for 5 to 10 minutes without the lids on I find is plenty (I have a fan in my cabinet).  \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eWarmth:\u003c\/strong\u003e I like to stick between \u003cstrong\u003e24 and 27 degrees \u003c\/strong\u003eCelsius. I use an \u003ca href=\"https:\/\/www.lovethatleaf.co.nz\/collections\/heat-pads\"\u003eInkbird heat mat\u003c\/a\u003e as I find it too hard to avoid dips below 24 overnight even in my Ikea cabinet (I have a converted Rusdta Wide).\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eNutrients: \u003c\/strong\u003eThe corm has its own starter store of nutrients to get things going (depending on how healthy it is), but that doesn't mean no nutrients are needed, just less. I tend to stay away from your typical high-nitrogen foliage fertilisers and use rooting fertilisers instead.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eYou could get away without any nutrients in the water until rooted, or just use a rooting fertiliser from the start (that's what I prefer as it's much easier to just make up the same nutrient solution for everyone in one go). My go-to is \u003ca href=\"https:\/\/www.lovethatleaf.co.nz\/products\/growth-technology-ccs-clonex-clone-solution\"\u003eGT CCS\u003c\/a\u003e propagation and rooting fertiliser. I use 5ml per 1 litre water.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003e\u003cspan style=\"background-color: rgb(217, 247, 246);\"\u003eWhy add a corm riser to the puddle method?\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003eAdding a corm riser is essentially an upgrade to the puddle method, so the general advice you'll find for the puddle method still applies.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eA corm riser gives you better chance of success vs the water-only puddle method, since rot is the biggest worry with the puddle method.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eI also prefer using a riser as you can keep a higher level of water in the cup, so it reduces the the worry of finding your corms have suddenly dried out and died, and makes it easier to keep that constant, high level of humidity.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAny plants, corms, plastic cups, lids, and any other accessories shown in photos NOT included. This is for the Corm Riser by itself.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"lovethatleaf","offers":[{"title":"Default Title","offer_id":47147944345796,"sku":"RPS-CRB","price":8.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0434\/5426\/7555\/files\/alocasia-corm-riser-cup.jpg?v=1793493074","url":"https:\/\/www.lovethatleaf.co.nz\/products\/alocasia-corm-riser-for-the-puddle-method","provider":"lovethatleaf","version":"1.0","type":"link"}